SPC3 Datasheet | Siemens Semiconductor Group

SIMATIC NET SPC3 Siemens PROFIBUS Controller User Description Date 09/25/02 SIM ATIC - NET SPC3 and DPS2 User Description (Siem ens PRO FIBUS Controller according to IEC 61158) Version: 2.0 D ate: 09/02 PROFIBUS Interface Center Liability Exclusion We have tested the contents of this document regarding the hardware and software described. Nevertheless, deviations, and we don’t guarantee plete agreement. document is tested periodically, however. Required included in subsequent versions. We gratefully accept improvement agreement with there may be The data in the corrections are suggestions for Copyright Copyright © Siemens AG 1995. All Rights Reserved. Unless permission has been expressly granted, passing on this document or copying it, or using and sharing its content are not allowed. Offenders will be held liable. All rights reserved, in the event a patent is granted or a utility model or design is registered. Subject to technical changes. Page 2 09/02 V2.0 SPC3 User Description Copyright (C) Siemens AG 2002. All rights reserved. PROFIBUS Interface Center Versions Release V 1.7 V 1.8 V1.9 Date 12/23/99 02/09/00 08/09/00 Changes Chapter 8.2 Current consumption without bus accesses Chapter 15.1 Contact persons Chapter 8.6.9 Humidity class Chapter 6.2.2.1 Publisher_Enable bit Chapter 6.2.10 DXB Chapter 15.1 Addresses Included the specification of the different manufacturers in Chap. 8.1, 8.3, 8.5 and 10.3 Order numbers chap 10.1 contact persons V 2.0 09/25/02 SPC3 User Description Copyright (C) Siemens AG 2002. All rights reserved. V2.0 Page 3 09/02 PROFIBUS Interface Center Table of Contents 1 2 3 4 INTRODUCTION FUNCTION OVERVIEW PIN DESCRIPTION MEMORY ALLOCATION 4.1 4.2 4.3 Memory Area Distribution in the SPC3 Processor Parameters (Latches/Register) Organizational Parameters (RAM) 8 9 10...