SLG59M1717V Datasheet | Silego

Description Operating from a 2.5 V to 5.5 V power supply and fully specified over the -40 °C to 85 °C Industrial temperature range, the SLG59M1717V is a high-performance 4 mΩ, 5 A single-channel n FET integrated power switch designed for all 0.8 V to 5.5 V power rail applications. The SLG59M1717V features adjustable inrush current control which is achieved by adjusting the VOUT slew rate with an external capacitor. Using a proprietary MOSFET design, the SLG59M1717V achieves a stable 4 mΩ RDSON across a wide input/supply voltage range. The SLG59M1717V also incorporates resistor-adjustable current limiting as well as thermal protection. Using Silego’s proprietary Cu FET™ technology for high-current operation, the SLG59M1717V is packaged in a space-efficient, low thermal resistance, Ro HS-pliant 1.6mm x 2.5 mm STQFN package. Features - Low Typical RDSON n FET Block: 4 mΩ - Maximum Continuous Switch Current: Up to 5 A - Supply Voltage: 2.5 V ≤ VDD ≤ 5.5 V - Wide Input Voltage Range: 0.8 V ≤ VIN ≤ VDD - Capacitor adjustable Start-up and In-rush Current Control - Two-stage Overcurrent Protection: - Resistor-adjustable Active Current Limit - Fixed 1.6 A Short-circuit Current Limit - Thermal Shutdown Protection - Open-drain PG Signaling - Operating Temperature: -40 °C to 85 °C - Low θJA, 16-pin 1.6 mm x 2.5 mm STQFN - Pb-Free / Halogen-Free / Ro HS pliant Pin Configuration VDD PG VIN VIN VIN VIN ON GND 1 16 14 15 VIN VOUT CAP RSET VOUT VOUT VOUT VOUT 16-pin FC-STQFN (Top View) Applications - Notebook Power Rail Switching - Tablet Power Rail Switching - Smartphone Power Rail Switching Block Diagram VIN CIN 2.5 V to 5.5 V CSLEW SW Closed R40SEk TΩ- CAP RSET ON/OFF SW Open - 40 kΩ sets a 5.7 A IACL Silego Technology, Inc. 000-0059M1717-100 5 A @ 4...