Datasheet4U Logo Datasheet4U.com

Si1001-C - 10-bit ADC MCU

General Description

herein, and does not give warranties as to the accuracy or completeness of the included information.

Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein.

Key Features

  • - Frequency range = 240.
  • 960 MHz - Sensitivity =.
  • 121 dBm - FSK, GFSK, and OOK modulation - Max output power = +20 dBm - RF power consumption - 18.5 mA receive - 85 mA @ +20 dBm transmit - Data rate = 0.123 to 256 kbps - Auto-frequency calibration (AFC) - Antenna diversity and transmit/receive switch control - Programmable packet handler - TX and RX 64 byte FIFOs - Frequency hopping capability - On-chip crystal tuning Digital Peripherals - 22 port I/O - Hardware enhanced UART, SPI.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SI1000 (SI Series) SNAP-IN MOUNT ALUMINUM ELECTROLYTIC NTE Electronics
SI1000 Single axis analog accelerometer SAFRAN
SI1002R N-channel MOSFET Vishay
SI1012 N-Channel Transistor MCC
SI1012CR N-Channel MOSFET Vishay Siliconix

Other Datasheets by Silicon Laboratories

Part Number Description
Si1001 10-Bit ADC MCU
Si1000 10-Bit ADC MCU
Si1002 10-Bit ADC MCU
Si1003 10-Bit ADC MCU
Si1004 10-Bit ADC MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Si1001-C Ultra-Low Power 32 kB, 10-bit ADC MCU with Integrated 240–960 MHz Transceiver Supply Voltage: 1.8 to 3.6 V - Typical sleep mode current < 0.1 µA; retains state and RAM contents over full supply range; fast wakeup of < 2 µs - Two built-in brown-out detectors cover sleep and active modes 10-Bit Analog to Digital Converter - Up to 300 ksps - Up to 18 external inputs - External pin or internal VREF (no external capacitor required) - Built-in temperature sensor (±3 °C); no calibration required - External conversion start input option - Autonomous burst mode with 16-bit automatic averaging  accumulator Dual Comparators - Programmable hysteresis and response time - Configurable as interrupt or reset source - Low current (< 0.