SST28VF040A Datasheet | Silicon Storage Technology

FEATURES : - Single Voltage Read and Write Operations - 5.0V-only for SST28SF040A - 2.7-3.6V for SST28VF040A - Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention - Memory Organization: 512K x8 - Sector-Erase Capability: 256 Bytes per Sector - Low Power Consumption - Active Current: 15 m A (typical) for 5.0V and 10 m A (typical) for 2.7-3.6V - Standby Current: 5 µA (typical) - Fast Sector-Erase/Byte-Program Operation - Byte-Program Time: 35 µs (typical) - Sector-Erase Time: 2 ms (typical) - plete Memory Rewrite: 20 sec (typical) - Fast Read Access Time - 5.0V-only operation: 90 and 120 ns - 2.7-3.6V operation: 150 and 200 ns - Latched Address and Data - Hardware and Software Data Protection - 7-Read-Cycle-Sequence Software Data Protection - End-of-Write Detection - Toggle Bit - Data# Polling - TTL I/O patibility - JEDEC Standard - Flash EEPROM Pinouts - Packages Available - 32-lead PLCC - 32-lead TSOP (8mm x 14mm and 8mm x 20mm) - 32-pin PDIP PRODUCT DESCRIPTION The SST28SF/VF040A are 512K x8 bit CMOS Sector Erase, Byte-Program EEPROMs. The SST28SF/VF040A are manufactured using SST’s proprietary, high performance CMOS Super Flash EEPROM Technology. The split-gate cell design and thick oxide tunneling injector attain better reliability and manufacturability pared with alternative approaches. The SST28SF/VF040A erase and program with a single power supply. The SST28SF/ VF040A conform to JEDEC standard pinouts for byte wide memories and are patible with existing industry standard flash EEPROM pinouts. Featuring high performance programming, the SST28SF/ VF040A typically Byte-Program in 35 µs. The SST28SF/ VF040A typically Sector-Erase in 2 ms. Both Program and Erase times can be optimized using interface features such as Toggle bit or Data# Polling to indicate the pletion of the Write cycle. To protect against an inadvertent write, the SST28SF/VF040A have on chip hardware and Software Data Protection schemes. Designed,...