XR16M564D Datasheet | Sipex Corporation

XR16M564/564D 1.62V TO 3.63V QUAD UART WITH 32-BYTE FIFO .. MAY 2008 REV. 1.0.0 GENERAL DESCRIPTION The XR16M5641 (M564) is an enhanced quad Universal Asynchronous Receiver and Transmitter (UART) with 32 bytes of transmit and receive FIFOs, programmable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 16 Mbps at 4X sampling rate. Each UART has a set of registers that provide the user with operating status and control, receiver error indications, and modem serial interface controls. An internal loopback capability allows onboard diagnostics. The M564 is available in a 48-pin QFN, 64-pin LQFP, 68-pin PLCC and 80-pin LQFP packages. The 64-pin and 80-pin packages only offer the 16 mode interface, but the 48 and 68 pin packages offer an additional 68 mode interface which allows easy integration with Motorola processors. The XR16M564IV (64-pin) offers three state interrupt output while the XR16M564DIV provides continuous interrupt output. The XR16M564 is patible with the industry standard ST16C554 and ST16C654/ 654D. NOTE: 1 Covered by U.S. Patent #5,649,122. Features - Pin-to-pin patible with ST16C454, ST16C554, TI’s TL16C754B and NXP’s SC16C754B - Intel or Motorola Data Bus Interface select - Four independent UART channels - - - - - - - - - - Register Set patible to 16C550 Data rates of up to 16 Mbps 32 byte Transmit FIFO 32 byte Receive FIFO with error tags 4 Selectable TX and RX FIFO Trigger Levels Automatic Hardware (RTS/CTS) Flow Control Automatic Software (Xon/Xoff) Flow Control Programmable Xon/Xoff characters Wireless Infrared (Ir DA 1.0) Encoder/Decoder Full modem interface - 1.62V to 3.63V supply operation - Sleep Mode with automatic wake-up - Crystal oscillator or external clock input APPLICATIONS - Portable Appliances - Telemunication Network Routers - Ethernet Network Routers - Cellular Data Devices - Factory Automation and Process Controls FIGURE 1. XR16M564...