SP8527 - Micropower Sampling 10-Bit A/D Converter

Product Overview

Sipex

Part number	SP8527
Manufacturer	Sipex
File Size	180.17 KB
Description	Micropower Sampling 10-Bit A/D Converter
Datasheet	SP8527 Datasheet
Additional preview pages of the SP8527 datasheet.

The SP8527 is a very low power 10-Bit A/D converter.

The SP8527 typically draws 230µA of supply current when sampling at 38.3 kHz.

Supply current drops linearly as the sample rate is reduced.

The input sampling scheme is full differential, where the maximum full scale range is VREF. The signal is applied between +IN and -IN. The signals applied at each input may both be dynamic. This is in contrast with pseudo differential devices which must have input low held at a constant level during conversion. The converter will provide significant common mode rejection because of the full differential sampling. Each input independently must remain between ground and Vcc to avoid clamping the i.

📁 Similar Datasheet

SP850S - Schottky Barrier Rectifiers (Eris)
SP8560N - Clock radios dedicated circuit (Si-Power)
SP8562 - Digital clock (Si-Power)
SP80001 - 800MHz Low-loss SAW Filter 53MHz Bandwidth (SIPAT)
SP8005 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8006 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8007 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8008 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)

Other Datasheets by Sipex

Published: Jun 7, 2005 |