SP8537 - Micropower Sampling 10-Bit A/D Converter

Product Overview

Sipex

Part number	SP8537
Manufacturer	Sipex
File Size	220.06 KB
Description	Micropower Sampling 10-Bit A/D Converter
Datasheet	SP8537 Datasheet
Additional preview pages of the SP8537 datasheet.

The SP8537 is a very low power 10-Bit data acquisition chip.

TheSP8537 typically draws 250µA of supply current when sampling at 29.5 kHz.

Supply current drops linearly as the sample rate is reduced.

Two program bits, which are shifted into the device prior to conversion, determine the input configuration. In the single ended MUX configuration the input signal will be applied to either channel 0 or channel 1 and will be ground referenced. The maximum full scale range is VCC. In the full differential mode, the signal will be applied between channel 0 and channel 1. The signals applied at each input may both be dynamic. This is in contrast with pseudo differential devices which must have input.

SP850S - Schottky Barrier Rectifiers (Eris)
SP8560N - Clock radios dedicated circuit (Si-Power)
SP8562 - Digital clock (Si-Power)
SP80001 - 800MHz Low-loss SAW Filter 53MHz Bandwidth (SIPAT)
SP8005 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8006 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8007 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8008 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP8008-08UTG - TVS Diode Arrays (Littelfuse)
SP8009 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)

Other Datasheets by Sipex

Published: Jun 7, 2005 |