SRM-1016 Datasheet | Sirenza Microdevices

Description The Sirenza Microdevices’ SRM-1016 is a high linearity active mixer for use in a wide variety of munication systems covering the 800-1000 MHz frequency bands. This device operates from a single 5V supply and provides 10d B of conversion gain while requiring only 0d Bm input to the integrated LO driver. The SRM-1016 also includes an integrated on chip IF amplifier and is fabricated using Silicon Germanium (Si Ge) device technology. The RF and LO ports can be driven differential or single ended. Each broadband port has been designed to minimize performance degradation while operating into highly reactive ponents such as SAW filters. The device is packaged in an industry standard 16 pin TSSOP with exposed paddle for superb RF and thermal ground. - 1000 MHz High Linearity Active Receive Mixer 16 pin TSSOP with Exposed Ground Pad Package Footprint: 0.197 x 0.252 inches (5.0 x 6.4 mm) Package Height: 0.039 inches (1.0 mm) Product Features Functional Block Diagram IFP VCC VEE RFP RFN 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 IFN VCC VEE LOP LON VEE VCC L2 - - - - - Active mixer with 10d B conversion gain Integrated 0d Bm LO drive and IF amplifier Differential or single-ended input Single supply operation (+5V) Broadband resistive 50Ω impedances on all three ports .. Applications VEE VCC L1 - 800-1000 MHz receivers Product Specifications Parameters RF Frequency Range LO Frequency Range IF Frequency Range Conversion Gain SSB Noise Figure Input IP3 Input P1d B Leakage (LO-RF) Leakage (LO-IF) Leakage (RF-IF) RF, LO, IF Return Loss Supply Voltage (Vcc) Supply Current LO Drive Thermal Resistance Matched to 50 Ω, see Note 2, page 3 junction-case Single-ended configuration, see Note 1, page 3 Single-ended configuration, see Note 1, page 3 Single-ended configuration, see Note 1, page 3 Matched to 50 Ω, see Note 2, page 3 RF1 = RF2 = -15 d Bm/tone, 1 MHz spacing Test Conditions: TA = 25ºC, VCC = 5.0V PLO = 0d Bm, PRF = -20d Bm, IF = 200MHz Unit MHz MHz MHz...