ST7036i Datasheet | Sitronix

Sitronix Preliminary ST7036 Dot Matrix LCD Controller/Driver - Features z 5 x 8 dot matrix possible z Low power operation support: -- 2.7 to 5.5V z Range of LCD driver power -- 2.7 to 7.0V z 4-bit, 8-bit, serial or 400kbits/s fast I2C-bus MPU interface enabled z 80 x 8-bit display RAM (80 characters max.) z 10,240-bit character generator ROM for a total of 256 character fonts(max) z 64 x 8-bit character generator RAM(max) z Support two display mode: 16- x 100-seg and 80 ICON 24- x 80-seg and 80 ICON z 16 x 5 - bit ICON RAM(max) - Description The ST7036 dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4-/ 8-bit, serial or fast I2C interface microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver. The ST7036 character generator ROM is extended to generate 256 5x8dot character fonts for a total of 256 different character fonts. The low power supply (2.7V to z Wide range of instruction functions: Display clear, cursor home, display on/off, cursor on/off, display character blink, cursor shift, display shift, double height font z Automatic reset circuit that initializes the controller/driver after power on and external reset pin z Internal oscillator(Frequency=540k Hz) and external clock z Built-in voltage booster and follower circuit (low power consumption ) z /SEG direction selectable z Multi-selectable for CGRAM/CGROM size z Instruction patible to ST7066U and KS0066U and HD44780 z Available in COG type 5.5V) of the ST7036 is suitable for any portable battery-driven product requiring low power dissipation. The ST7036 LCD driver consists of 17 mon signal drivers and 100 segment signal...