SKY66100-11 Datasheet | Skyworks Solutions

Features - Transmit output power: >+27 d Bm - High efficiency PA - Receive loss: <0.4 d B - Transmit bypass mode with 0.9 d B insertion loss - Sleep mode current: < 1 μA - Integrated control logic - Small footprint MCM (16-pin, 4 x 4 mm) package (MSL3, 260 C per JEDEC J-STD-020) Skyworks Green TM products are pliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green TM, document number SQ04- 0074. Description The SKY66100-11 is a high-performance, transmit/receive (Tx/Rx) front-end module (FEM). The device includes a power amplifier (PA) capable of more than +27 d Bm of transmit output power at more than 45 percent PAE for the module (55 percent for the standalone PA). For current-sensitive applications, the PA can be bypassed to save battery current. All functionality can be controlled by a three-wire interface. The FEM can be placed in a deep “sleep” mode, drawing less than 1 μA of current. The receive chain consists of a low-loss single-pole, triple-throw (SP3T) switch, which provides an insertion loss of approximately 0.4 d B. Three separate VCC pins enable maximum RF isolation. The SKY66100-11 is packaged in a 16-pin, 4 x 4 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution. A functional block diagram of the SKY66100-11 is shown in Figure 1. The 16-pin MCM package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. CSD CTX BYP Output Matching Network PA_OUT TX_IN Logic TX PA Control SPST Regulator Filter ANT RX SP3T Y0537 Figure 1. SKY66100-11 FEM Block Diagram Skyworks Solutions, Inc. - Phone [781] 376-3000 - Fax [781] 376-3100 - sales@skyworksinc. - .skyworksinc. 201829E - Skyworks Proprietary Information - Products and Product Information are Subject to Change Without Notice - June 1, 2015 DATA SHEET - SKY66100-11: TRANSMIT/RECEIVE...