SKY66101-11 Datasheet | Skyworks Solutions

Features - Integrated PA with +30 d Bm output power - Integrated LNA with programmable bypass - Low noise figure: 2.5 d B, typical - Single-ended 50 Ω transmit RF interface - Differential 100 Ω receive RF interface - Fast turn-on/turn-off time: <1 μs - Supply voltage: 2.0 V to 4.8 V - Sleep mode current: < 1 μA - Small MCM (36-pin, 6 x 6 x 0.9 mm) package (MSL3, 260 C per JEDEC J-STD-020) Skyworks Green TM products are pliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green TM, document number SQ04- 0074. 36 GND 35 VSUP1 34 GND 33 VCC1 32 GND 31 VCC0 30 GND 29 VCC2 28 GND CSD 1 GND 2 RX_N 3 RX_P 4 GND 5 N/C 6 PA_IN 7 CPS 8 CTX 9 27 GND 26 GND 25 GND 24 GND 23 GND 22 GND 21 GND 20 ANT_1 19 GND 202884D-002 ANT_SEL 10 GND 11 GND 12 GND 13 LNA_IN 14 GND 15 RX_FLT 16 GND 17 ANT2 18 Figure 2. SKY66101-11 Pinout (Top View) RXP LNA ANT2 LNA_IN R x_FLT 202884D-001 Figure 1. SKY66101-11 Functional Block Diagram Description The SKY66101-11 is a high-performance, highly integrated RF front-end module (FEM) designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 902 to 928 MHz frequency range. The SKY66101-11 is designed for ease of use and maximum flexibility with fully matched, 50 Ω power amplifier (PA) input and output, and digital controls patible with 1.6 to 3.6 V CMOS levels. The RF blocks operate over a wide supply voltage range from 2.0 to 4.8 V that allows the SKY66101-11 to be used in battery powered applications over a wide spectrum of the battery discharge curve. The SKY66101-11 is packaged in a 36-pin, 6 x 6 x 0.9 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution. A functional block diagram of the SKY66101-11 is shown in Figure 1. The 36-pin MCM package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. - Phone [781]...