CXP82712 Datasheet | Sony Semiconductor Solutions

CXP82712/82716 CMOS 8-bit Single Chip Microputer Description The CXP82712/82716 microputer is posed of a 8-bit CPU, ROM, RAM, and I/O ports. These chips feature many other high-performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time base timer, fluorescent display controller/driver, remote control receiver, PWM output circuit and 32k Hz timer/counter. This device also includes sleep/stop functions which can be used to achieve low power consumption. 64 pin SDIP (Plastic) Structure Silicon gate CMOS IC Features - Instruction set which supports a wide array of data types - 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and boolean bit operations. - Minimum instruction cycle 400ns for 10MHz, 122µs for 32k Hz operation - On-chip ROM 12K bytes (CXP82712) 16K bytes (CXP82716) - On-chip RAM 448 bytes (Including fluorescent display data area) - Peripheral functions - A/D converter 8-bit, 8-channel, successive approximation system (conversion rate 32µs/10MHz) - Serial interface On-chip 8-bit, 8-stage FIFO (1 to 8 bytes auto transfer), 1 circuit 2-channel - Timers 8-bit timer 8-bit timer/counter 19-bit time base timer 32k Hz timer/counter - Fluorescent display controller/driver 24 high voltage tolerance output ports Maximum of 144 segments display available 1 to 16 digits dynamic display Dimmer function High voltage tolerance output (40V) On-chip pull-down resistor (Mask option) Hardware key scan function (Maximum of 8 × 8 key matrix available) - Remote control receiver circuit On-chip 6-stage FIFO 8-bit pulse measurement counter - PWM output 8-bit, 1-channel - Interruption 13 factors, 13 vectors, multi-interruption possible - Standby mode Sleep/stop - Package 64-pin plastic SDIP - Piggyback/evaluator CXP82700 64-pin ceramic SDIP Sony reserves the right to change products and specifications without prior notice. This information does not convey any...