CXP827P16 Datasheet | Sony Semiconductor Solutions

CMOS 8-bit Single Chip Microputer Description The CXP827P16 microputer is posed of a CPU, ROM, RAM, and I/O ports. These chips feature many other high-performance circuits in a single-chip CMOS design, including an A/D converter, serial interface, timer/counter, time-base timer, fluorescent display panel controller/driver, remote control receiver, PWM output circuit and 32k Hz timer/counter. This IC also includes sleep/stop functions which can be used to achieve low power consumption. CXP827P16 is the PROM-incorporated version of the CXP82716 with built-in mask ROM, and it is able to write directly into the program. Thus, it is most suitable for evaluation use during system development and for small-quantity production. 64 pin SDIP (Plastic) Structure Silicon gate CMOS IC Features - Instruction set which supports a wide array of data types - 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and Boolean bit operations. - Minimum instruction cycle 400ns at 10MHz 122µs at 32k Hz - On-chip PROM 16 Kbytes - On-chip RAM 448 bytes (Including fluorescent display data area) - Peripheral functions - A/D converter 8-bit, 8-channel, successive approximation system (conversion rate 32µs/10MHz) - Serial interface On-chip 8-bit, 8-stage FIFO (1 to 8 bytes auto transfer), 2 channels for 1 circuit - Timers 8-bit timer 8-bit timer/counter 19-bit time-base timer 32k Hz timer/counter - Fluorescent display panel controller/driver High voltage drive output port of 24 pins (40V) Maximum of 144 segments display available 1 to 16-digit dynamic display Dimmer function On-chip pull-down resistor Hardware key scan function (Maximum of 8 × 8 key matrix available) - Remote control receiver circuit On-chip 6-stage FIFO 8-bit pulse measurement counter - PWM output 8-bit, 1-channel - Interrupts 13 factors, 13 vectors multi-interruption possible - Standby mode SLEEP/STOP - Package 64-pin plastic SDIP Sony reserves the right to...