SEU02G64B4BF2SA-30R Datasheet | Swissbit

Features : 240 Pin UDIMM SEU02G64B4BF2SA-xx R 2GByte in FBGA Technology Ro HS pliant Options: - Data Rate / Latency DDR2 800 MT/s CL6 DDR2 667 MT/s CL5 Module density 2048MB with 16 dies and 2 ranks Standard Grade (TA) (TC) 0°C to 70°C 0°C to 85°C Marking -25 -30 - - 240-pin 64-bit Dual-In-Line Double Data Rate synchronous DRAM Module Module organization: dual rank 256M x 64 - - - - - - - - - VDD = 1.8V ±0.1V, VDDQ 1.8V ±0.1V 1.8V I/O ( SSTL_18 patible) Auto Refresh (CBR) and Self Refresh 8k Refresh every 64ms Serial Presence Detect with EEPROM Gold-contact pads with 30µ” electrolytic gold This module is fully pin and functional patible to the JEDEC PC2-6400 spec. and JEDEC- Standard MO-237. (see .jedec.org) The pcb and all ponents are manufactured according to the Ro HS pliance specification [EU Directive 2002/95/EC Restriction of Hazardous Substances (Ro HS)] DDR2 - SDRAM ponent SAMSUNG K4T1G084QF DIE Rev. F 128Mx8 DDR2 SDRAM in FBGA-60 package 4-bit prefetch architecture DLL to align DQ and DQS transitions with CK Multiple internal device banks for concurrent operation Programmable CAS latency (CL) Posted CAS additive latency (AL) WRITE latency = READ latency - 1 t CK Programmable burst length: 4 or 8 Adjustable data-output drive strength On-die termination (ODT) - - - - - - - - - - - Environmental Requirements: - - - - - - Operating temperature (ambient) Standard Grade 0°C to 70°C Operating Humidity 10% to 90% relative humidity, noncondensing Operating Pressure 105 to 69 k Pa (up to 10000 ft.) Storage Temperature -55°C to 100°C Storage Humidity 5% to 95% relative humidity, noncondensing Storage Pressure 1682 PSI (up to 5000 ft.) at 50°C Figure: mechanical dimensions 1 if no tolerances specified ± 0.15mm Page 1 of 16 Swissbit AG Industiestrasse 4 CH-9552 Bronschhofen Fon: +41 (0) 71 913 03 03 Fax: +41 (0) 71 913 03 15 .swissbit. e Mail: info@swissbit. preliminary Data Sheet Rev.0.9 This Swissbit module is an industry standard 240-pin...