NQ40x40QGC30 Datasheet | SynQor

Technical Specification 9-40 V Continuous Input 0-40 V Outputs 30 A Current Non Isolated Quarter-brick DC-DC Converter The Ni Qor® quarter-brick dc-dc converter is a non‑isolated buck-boost regulator, which employs synchronous Non-Isolated rectification to achieve extremely high conversion efficiency. The High Input Voltage Ni Qor Brick family of converters can be used in traditional DPA (distributed power architecture) systems or provide a regulated output voltage from a battery source or other variable voltage source. The Ni Qor Brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. These modules are Ro HS 6/6 pliant (see last page). Operational Features - Ultra high efficiency, up to 95% at full rated load - Delivers up to 30 A of output current - Input Voltage Range: 9 - 40 V - Output voltage range: 0 - 40 V (negative output is possible) - Extensive on-board input and output filtering - No minimum load requirement means no preload resistors required - Buck or buck-boost mode available - Adjustable current limit with current monitor (C option) Ni Qor quarter-brick module Protection Features - Input under-voltage lockout protects the converter at low input voltage conditions - Over-current shutdown protects converter from excessive load current or short circuits - Input/output over-voltage protection protects load and regulator from damaging voltages - Thermal shutdown protects converter from abnormal environmental conditions Mechanical...