NQ40x40QGx30 Datasheet | SynQor

Technical Specification 9-40V Continuous Input 0-40V Outputs 30A Current Non Isolated Quarter-brick DC-DC Converter The Ni Qor Quarter-brick dc-dc converter is a non-isolated buck-boost regulator, which employs synchronous Non-Isolated rectification to achieve extremely high conversion efficiency. The High Input Voltage Ni Qor Brick family of converters can be used in traditional DPA (distributed power architecture) 0N C3 G Q 40 W 40 Q Quarter-brick family can be configured to Buck the input voltage down to a lower voltage or Boost the input voltage up to a higher voltage using a single external resistor. These modules are Ro HS 6/6 pliant (see page 11). Operational Features Ultra high eficiency, up to 95% at full rated load current Delivers up to 30A of output current Input Voltage Range: 9-40V Output voltage range: 0-40V (negative output is possible) Extensive on-board input and output iltering No minimum load requirement means no preload resistors required Buck or buck-boost versions available Adjustable current limit with current monitor (C option) Ni Qor Quarter-brick module Protection Features Input under-voltage lockout protects the converter at low input voltage conditions Over-current shutdown protects converter from excessive load current or short circuits Input/output over-voltage protection protects load and regulator from damaging voltages Thermal shutdown protects converter from abnormal environmental conditions Mechanical Features - Industry standard quarter-brick pin-out coniguration - Standard size: Encased - 1.54" x 2.39" (39x60.6 mm) Flanged - 2.20" x 2.39" (55.88x60.6 mm) - Total height only 0.515" (13.08 mm) - Total weight: Encased - 3oz (85g) Flanged - 3.17oz (90g) Safety Features UL 60950-1:2003 EN60950-1:2006 / A11:2009 / A1:2010 IEC...