OPB122B Datasheet | TT Electronics

OPB120A, OPB120B, OPB121B, OPB122B Features : - Choice of output configuration - Printed circuit board mounting - Opaque plastic housing - Low profile - 0.080” (2.03 mm) wide slot - 0.275” (6.99 mm) lead spacing Description: The OPB120 through OPB123 devices consist of an infrared emitting diode and a Photologic® sensor (which is a monolithic integrated circuit that incorporates a linear amplifier and a Schmitt Trigger). The OPB120 series have an LED and Photologic® sensor mounted on opposite sides of a 0.080” (2.03 mm) wide gap of an opaque housing. The OPB12_A series have a molded 0.040” (1.02 mm) wide apertures located over both the emitter and the Photologic® sensor. The OPB12_B seriesseries have a molded 0.040” (1.016 mm) wide apertures located over the emitter and 0.010” (0.254 mm) over the Photologic® sensor. All devices in this series have the added stability utilizing hysteresis built into the amplification circuitry. The electrical output can be specified as either buffered Totem-Pole (OPB 120A, OPB120B), buffered Open-Collector (OPB121B), and Inverted Totem-Pole (OPB122B). Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: - Mechanical switch replacement - Speed indication (tachometer) - Mechanical limit indication - Edge sensing - Object sensing Ordering Information Part Number Sensor Photologic® Aperture Emitter/Sensor OPB120A OPB120B Totem-Pole 0.04" / 0.04" 0.04" / 0.01" OPB121B Open-Collector 0.04" / 0.01" Inverted Totem Pole 0.04" / 0.01" Pin # 1 2 3 4 5 Description Cathode Anode VCC Output...