CCR-59S - Latching Coaxial Switch

Datasheet Summary

Description

The CCR/CR-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input to any of 12 outputs.

The characteristic impedance is 50 Ohms.

Teledyne

📥 Download Datasheet

Datasheet Details

Part number	CCR-59S
Manufacturer	Teledyne
File Size	732.80 KB
Description	Latching Coaxial Switch
Datasheet	CCR-59S Datasheet
Additional preview pages of the CCR-59S datasheet.

📁 Similar Datasheet

CCR-500-1 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-100-2 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-100-2B - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-1000-1 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-230-1 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-230-2 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-250-1 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-250-1B - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-250-2 - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)
CCR-250-2B - (CCR-xxx) Surface Mount Resistors With Cover & Tabs (Component General)

Other Datasheets by Teledyne

CCR-53S - Latching SPDT Coaxial Switch
CCR-58S - Normally Open Coaxial Switch
CCR-33S - Failsafe SPDT Coaxial Switch
CCR-38S - Normally Open Coaxial Switch
CCR-38U - Normally Open SPnT Coaxial Switch
CCR-40K - Failsafe SPDT Coaxial Switch
CCRT-40 - Latching SPDT Coaxial Switch

Full PDF Text Transcription

Click to expand full text

COAX SWITCHES Series CCR-59S SP12T, DC–18 GHz Latching Coaxial Switch PART NUMBER DESCRIPTION CCR-59S Latching SP12T Coax Switch, DC-18GHz CR-59S Elite Latching SP12T Coax Switch, DC-18GHz The CCR/CR-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input to any of 12 outputs. The characteristic impedance is 50 Ohms. Each position has an individual actuator mechanism allowing random position selection with minimum switching time. The CCR/CR-59S comes with a latching actuator. The latching switch remains in the last position selected when the switch is de-energized. STD dual command requires a reset pulse before a new selected position. A separate reset circuit allows all positions to be set to an open position.

Published: Aug 9, 2023 |