Datasheet4U Logo Datasheet4U.com

XC6219 - 300mA High Speed LDO Regulators

Description

The XC6219 series are highly accurate, low noise, CMOS LDO Voltage Regulators.

Offering low output noise, high ripple rejection ratio, low dropout and very fast turn-on times, the XC6219 series is ideal for today’s cutting edge mobile phone.

Features

  • imum Output Current Dropout Voltage Operating Voltage Range Output Voltage Range Highly Accuracy Low Power Consumption Standby Current High Ripple Rejection Operating Ambient Temperature Low ESR Capacitor Ultra Small Packages Environmentally Friendly : 150mA (VOUT1.8V, A~D type) 300mA (VOUT>1.3V, E~H type) : 200mV @ 100mA : 2.0V ~ 6.0V : 0.9V ~ 5.0V (0.05V steps) : ±2% (VOUT>1.5V) ±30mV (VOUT≦1.5V) ±1% (VOUT≧3.0V) : 25μA (TYP. ) : Less than 0.1μA (TYP. ) : 65dB @10kH.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC6211 300mA High Speed LDO Regulators Torex
XC6218 Low Power Supply LDO Regulators TOREX
XC6206 100mA Low Dropout CMOS Voltage Regulators JinYu
XC6206 Linear voltage regulator UMW
XC6238 300mA High Speed LDO Regulator Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC6210 High Current / High Speed LDO Regulators
XC6212 (XC6209 / XC6212) High Speed LDO Regulator
XC6213 High Speed LDO Regulators
XC6214 CMOS Low Power Consumption
XC6215 Low Power Consumption Voltage Regulator

Full PDF Text Transcription

Click to expand full text
XC6219 Series 300mA High Speed LDO Regulators with ON/OFF Switch ETR03007-011c ■GENERAL DESCRIPTION The XC6219 series are highly accurate, low noise, CMOS LDO Voltage Regulators. Offering low output noise, high ripple rejection ratio, low dropout and very fast turn-on times, the XC6219 series is ideal for today’s cutting edge mobile phone. Internally the XC6219 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators. The XC6219’s current limiters' foldback circuit also operates as a short protect for the output current limiter and. the output pin. The output voltage is set by laser trimming. Voltages are selectable in 50mV steps within a range of 0.9V to 5.0V.
Published: |