Datasheet4U Logo Datasheet4U.com

TA7288P Datasheet Dual Bridge Driver

Manufacturer: Toshiba

Overview: TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7288P TA7288P Sequential Dual-Bridge Driver (Driver for Switching between Forward and Reverse Rotation) for DC Motor The TA7288P is a bridge driver that is ideal for normal / reverse switching. This circuit offers four modes: normal rotation, reverse rotation, stop, and brake. The output current is 1.0 A (AVE.) and 2.0 A (PEAK). TA7288P has an ideal circuit configuration for VCR front tape loading and offers two types of power supply pins. One is for output, the other for control. The Vref pin on the output side used to control the motor voltage facilitates motor voltage adjustment. The IC requires little input current, enabling direct connection with CMOS. Weight: 2.47 g (typ.

General Description

GND terminal Output terminal Output terminal Input terminal Input terminal Input terminal Supply voltage terminal for Logic Supply voltage terminal for control Supply voltage

Key Features

  • z Wide range of operating voltage: VCC (opr. ) = 4.5 to 18 V VS (opr. ) = 0 to 18 V Vref (opr. ) = 0 to 18 V No malfunction occurs even if VCC is higher than VS or vice versa. however, observe Vref ≤ VS. z Output current up to 1.0 A (AVE. ) and 2.0 A (PEAK) z Built-in thermal shutdown circuit and overcurrent protection circuit for output pins z Built-in punch.
  • through current restriction circuit z Built-in back electromotive force absorber diode z Built-in hysteresis circuit The TA7288P: The.

More Datasheets from Toshiba

Part Number Description
TA7289F PWM STEPPING MOTOR DRIVER
TA7289FG PWM STEPPING MOTOR DRIVER
TA7289FG PWM STEPPING MOTOR DRIVER
TA7289P PWM STEPPING MOTOR DRIVER
TA7205AP 5.8W AUDIO POWER AMPLIFIER FOR CAR-STEREO / CAR-RADIO OUTPUT
TA7291F BRIDGE DRIVER
TA7291FG BRIDGE DRIVER
TA7291P BRIDGE DRIVER
TA7291S BRIDGE DRIVER
TA7291SG BRIDGE DRIVER

TA7288P Distributor