Datasheet4U Logo Datasheet4U.com

TA7289F Datasheet Pwm Stepping Motor Driver

Manufacturer: Toshiba

Overview: TA7289P/F/FG TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA7289P,TA7289F/FG PWM STEPPING MOTOR DRIVER The TA7289P, TA7289F/FG are PWM solenoid driver designed especially for use high efficiency stepping motor control. It consist of 1.5A peak current drive capable output full bridge driver, oscillation circuit for PWM switching, 4bit D−A for output current control and TTL patible input circuit.

General Description

NF voltage supply input terminal Signal input terminal Signal input terminal Function Internal oscillation frequency input terminal Output current detection terminal Output B terminal parator input terminal Output A terminal GND terminal Power voltage supply terminal D / A input terminal D / A input terminal D / A input terminal D / A input terminal GND terminal Note: Pin (1), (4), (6), (8), (11), (13) of TA7289F/FG are all NC (Non−connection) FUNCTION IN A IN B

Key Features

  • z Wide Range of Operating Voltage : VCC (opr. ) Min. = 6~27 V z High Current Capability: IO Max = 1.5 A (PEAK) z LS.
  • TTL Compatible Control Inputs (IN A, IN B) z Few External Components Required. z Build.
  • in 4bit DAC. TA7289F/FG The TA7289FG is a Pb-free product. The TA7289P is Sn plated product including Pb. The following conditions apply to solderability:.
  • Solderability 1. Use of Sn-37Pb solder bath.
  • solder bath temperature = 230°C.
  • dipping time = 5 seconds.
  • numb.

More Datasheets from Toshiba

Part Number Description
TA7289FG PWM STEPPING MOTOR DRIVER
TA7289FG PWM STEPPING MOTOR DRIVER
TA7289P PWM STEPPING MOTOR DRIVER
TA7288P DUAL BRIDGE DRIVER
TA7205AP 5.8W AUDIO POWER AMPLIFIER FOR CAR-STEREO / CAR-RADIO OUTPUT
TA7291F BRIDGE DRIVER
TA7291FG BRIDGE DRIVER
TA7291P BRIDGE DRIVER
TA7291S BRIDGE DRIVER
TA7291SG BRIDGE DRIVER

TA7289F Distributor