Datasheet4U Logo Datasheet4U.com

TB6524FN - DC MOTOR DUAL FULL BRIDGE DRIVER

General Description

Enable signal input, Hi : Enabled, Low : All output OFF Channel A input signal terminal Ground terminal Channel A output terminal Channel A : Output current is set by external resistance.

Channel A : Output current is set by external resistance.

Key Features

  • l Operating voltage range : VCC = 1.5 ~ 7.0 V (normal operation) VCC = 2.0 ~ 7.0 V (fixed current operation) l Output current l Built.
  • in enable terminal : IOUT = 100 mA l Built.
  • in diode for absorbing counter electromotive force Weight: 0.07 g (Typ. ) BLOCK.

📥 Download Datasheet

Datasheet Details

Part number TB6524FN
Manufacturer Toshiba
File Size 224.17 KB
Description DC MOTOR DUAL FULL BRIDGE DRIVER
Datasheet download datasheet TB6524FN Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB6520P PWM TYPE 3-PHASE FULL-WAVE SENSORSESS MOTOR CONTROLLER Toshiba
TB6526F CHOPPER-TYPE BIPOLAR STEPPING MOTOR CONTROL DRIVER IC Toshiba
TB6528P FIVE-PHASE STEPPING MOTOR DRIVE CONTROLLER Toshiba
TB6500AH 2 PHASE BIPOLAR STEPPER + FULL BRIDGE DRIVER Toshiba
TB6501P BRIDGE DRIVER WITH ROTATION DETECTOR Toshiba

Other Datasheets by Toshiba

Part Number Description
TB6552F DUAL-BRIDGE DRIVER IC FOR DC MOTORS
TB6552FL DUAL-BRIDGE DRIVER IC FOR DC MOTORS
TB6552FN DUAL-BRIDGE DRIVER IC FOR DC MOTORS
TB6552FNG Dual-Bridge Driver
TB6552FTG Dual-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com TB6524FN TOSHIBA Bi−CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB6524FN DC MOTOR DUAL FULL BRIDGE DRIVER (H−SWITCH) The TB6524FN is a bridge driver most suitable for switching between normal rotation and reverse rotation and can control three modes, normal rotation, reverse rotation, and stop. The driver is capable of handling output current of 100 mA. Fixed current operation is also available as the control method. FEATURES l Operating voltage range : VCC = 1.5 ~ 7.0 V (normal operation) VCC = 2.0 ~ 7.0 V (fixed current operation) l Output current l Built−in enable terminal : IOUT = 100 mA l Built−in diode for absorbing counter electromotive force Weight: 0.07 g (Typ.) BLOCK DIAGRAM 1 2001-06-13 TB6524FN PIN FUNCTION PIN No.