TLRMH265P Datasheet | Toshiba

.. TOSHIBA LED Lamp In Ga AℓP Red Light Emission - - - - - - - - 5mm diameter In Ga AℓP red LED Diffused milky white lens Low drive current, high intensity red light emission All plastic molded lens, provides an excellent on- off contrast ratio. Fast response time, capable of pulse operation. Straight lead type Application: Exit sign, security equipment Unit in mm Maximum Ratings (Ta = 25°C) Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 125 -40~100 -40~120 Unit m A V m W °C °C JEDEC EIAJ TOSHIBA Weight: 0.31 g ― ― Electrical And Optical Characteristics (Ta = 25°C) Characteristic Forward voltage Reverse current Luminous intensity Peak emission wavelength Spectral line half width Dominant wavelength Symbol VF IR IV λP ∆λ λd IF = 20m A VR = 4V IF = 20m A IF = 20m A IF = 20m A IF = 20m A Test Condition Min ― ― 272 ― ― ― Typ. 2.05 ― 650 636 20 626 Max 2.5 50 ― ― ― ― Unit V µA mcd nm nm nm Data Sheet 4 U . 2002-09-25 .. Precaution - - - Please be careful of the followings Soldering temperature: 260°C max Soldering time: 3s max (Soldering portion of lead: Up to 2mm from the body of the device) If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. Data Sheet 4 U . 2002-09-25 .. IF- VF 50 Ta = 25°C 30 5000 3000 Ta = 25°C - IF (m A) (mcd) Luminous intensity 1.8 2.0 2.2 10 1000 500 300 Forward current...