TPD1036F Description
This pin is connected to a pull-down resistor internally, so that even if the input is open-circuited, output never turns on inadvertently. This pin is connected to a pull-down resistor internally, so that even if the input is open-circuited, output never turns on inadvertently. Drain current is limited (by current limiter) if it exceeds 1 A (min) in order to protect the IC.
TPD1036F Key Features
- Two built-in power IC chips with a structure that incorporates a control block and a vertical power MOSFET on each chip
- Can be directly driven from a microprocessor, a CMOS logic IC, etc
- Low ON-resistance: RDS (ON) = 0.5 Ω (max) (@VIN = 5 V, ID = 0.7 A, Tch = 25°C)
- Low drain cut-off current: IDSS = 10 μA (max) (@VIN = 0 V, VDS = 30 V, Tch = 25°C)
- Low input current: IIN = 300 μA (max) (@VIN = 5 V, Tch = -40 to 110°C)
- Housed in the 8-pin SOP package and supplied in embossed carrier tape