TPD4113AK Datasheet | Toshiba

Features - - - - - - - - Bootstrap circuit gives simple high side power supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 µs, and it is the best for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in. Included under voltage protection and thermal shutdown. The regulator of 7V (typ.) is built in. Package: 23-pin HZIP. This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that the environment is protected against electrostatic discharge. Weight HZIP23-P-1.27F : 6.1 g (typ.) HZIP23-P-1.27G : 6.1 g (typ.) HZIP23-P-1.27H : 6.1 g (typ.) 2005-05-20 TENTATIVE Pin Assignment 1 HU 2 3 HV HW 4 LU 5 LV 6 7 LW IS1 8 9 10 11 12 13 NC BSU U V BB 1 BSV V 14 15 16 17 18 19 20 21 22 23 BSW W V BB 2 NC IS2 NC DIAG V CC GND V REG Marking Lot No. JAPAN Part No. (or abbreviation code) A line indicates lead (Pb)-free pac kage or lead (Pb)-free finish. 2005-05-20 TENTATIVE Block Diagram V CC 21 9 BSU 12 BSV 14 BSW 7V Regulator Under Under Undervoltage voltage voltage Protection Protection Protection Undervoltage Protection High-side Level Shift Driver Thermal Input Control Shutdown 10 U 13 V 15 W Low -side Driver 18 IS2 7 IS1 11 V BB1 16 V BB2 V REG 23 HU 1 HV 2 HW 3 LU 4 LV 5 LW 6 DIAG 20 22 GND 2005-05-20 TENTATIVE Pin Description Pin No. 1 2 Symbol HU HV Pin Description The control terminal of IGBT by the side of U top arm. It turns off more than by 1.5V. It turns on more than by 3.5V. The control terminal of IGBT by the side of V top arm. It turns off more than by...