Datasheet4U Logo Datasheet4U.com

TA7736 - DC MOTOR DRIVER IC

General Description

Control Amp.

negative terminal Control Amp.

phase Hall Amp.

phase Hall Amp.

phase Hall Amp.

phase Hall Amp.

phase Hall Amp.

Key Features

  • l 3 Phase Bi.
  • Directional Driver and Output Current Up to 1.0 A. l Few External Parts Required. l Wide Operating Supply Voltage Range : VCC (opr) (Min. ) = 7~20 V l Forward and Reverse Rotation is Controlled Simply by Means of a CW / CCW Control Signal Fed Into 16PIN. l High Sensitivity of Position Sensing Amplifier. (VH = 10 mVp.
  • p (Typ. ), Recommend to Use.

📥 Download Datasheet

Datasheet Details

Part number TA7736
Manufacturer Toshiba
File Size 182.34 KB
Description DC MOTOR DRIVER IC
Datasheet download datasheet TA7736 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TA7738 AMPLIFIER SYSTEM FOR CASSETTE TAPE RECORDER Unisonic
TA7705P (TA7405P / TA7705P) Pre Amp ETC
TA7712F 3 PHASE BI-DIRECTIONAL FOR MOTOR CONTROL IC Toshiba Semiconductor
TA7712FG Full-Wave Brushless DC Motor Controller IC Toshiba Semiconductor
TA7712P 3 PHASE BI-DIRECTIONAL FOR MOTOR CONTROL IC Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TA7736F DC MOTOR DRIVER IC
TA7736P DC MOTOR DRIVER IC
TA7733F FUNCTIONAL BRIDGE DRIVER
TA7733FG FUNCTIONAL BRIDGE DRIVER
TA7739F 3V Dual Preamplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TA7736P/F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA7736P,TA7736F DC MOTOR DRIVER IC The TA7736P is a 3 phase Bi−directional motor driver IC. It designed for use VCR, tape deck, floppy disk and record player motor drivers. It contains output power drivers, position sensing circuits, control amplifier and CW / CCW control circuit. FEATURES l 3 Phase Bi−Directional Driver and Output Current Up to 1.0 A. l Few External Parts Required. l Wide Operating Supply Voltage Range : VCC (opr) (Min.) = 7~20 V l Forward and Reverse Rotation is Controlled Simply by Means of a CW / CCW Control Signal Fed Into 16PIN. l High Sensitivity of Position Sensing Amplifier. (VH = 10 mVp−p (Typ.), Recommend to Use TOSHIBA Ga−As Hall Sensor “THS” Series.