Datasheet4U Logo Datasheet4U.com

TB9053FTG - brushed DC motor driver

General Description

Pin No.

Key Features

  • Motor driver block: Dual-channel, H-bridge driver (Ron(Nch+Nch)) < 350 mΩ (Max @ Tj = 150°C, VBAT = 8 V) Dual-Channel Mode and Combined-Channel Mode selectable, connecting two outputs externally allows this IC to function as a single-channel H-bridge circuit and the device is also used as a 4-channel Half Bridge driver.
  • Detection features: Over-current detection, over-temperature detection, VBAT under-voltage detection, and VCC under-voltage detection.
  • Initial diagnosis: Power s.

📥 Download Datasheet

Datasheet Details

Part number TB9053FTG
Manufacturer Toshiba
File Size 5.75 MB
Description brushed DC motor driver
Datasheet download datasheet TB9053FTG Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Bi-CMOS Linear Integrated Circuit, Silicon Monolithic TB9053FTG,TB9054FTG TB9053FTG,TB9054FTG PWM-type, dual-channel, H-bridge, brushed DC motor driver for automotive application 1. Overview TB9053FTG and TB9054FTG integrated circuit (IC) incorporates in each two output driver channels for direct drive of a brushed DC motor for automotive application. TB9053FTG PWM control with low on-resistance enables highly efficient motor drive output. P-LQFN40-0606-0.50-001 The PWM1 and PWM2 pins specify forward, reverse, or brake modes for motor 1, and the PWM3 and PWM4 pins specify these TB9054FTG modes for motor 2. The ENABLE pins (EN1/ENB1 and EN2/ENB2) specify drive or stop mode for the motor. The ISEL1 pin specifies whether the motor drive uses the PWM1 and PWM2 pins or SPI.