TLP2395 Datasheet | Toshiba

Photocouplers Ga AℓAs Infrared LED & Photo IC 1. Applications - Programmable Logic Controllers (PLCs) - High-Speed Digital Interfacing for Instrumentation and Control Devices - Simplex/Multiplex Data Transmission 2. General The Toshiba TLP2395 consists of two Ga AℓAs light-emitting diode coupled with a high-gain, high-speed photo detector. It is housed in the SO6 package. Since it is making two LED reverse parallel, it can be dealt with both sinking and sourcing input signals. The detector has a totem-pole output stage with current sourcing and sinking capabilities. The TLP2395 has an internal Faraday shield that provides a guaranteed mon-mode transient immunity of ±20 k V/µs. The TLP2395 has a logic buffer output. An inverter output version, the TLP2398, is also available. 3. Features (1) Buffer logic type (totem pole output) (2) Package: SO6 (3) Supply voltage: 3 to 20 V (4) Threshold input voltage, low to high: IFLH = ±2.3 m A (max) (5) Propagation delay time: tp HL/tp LH = 250 ns (max) (6) Pulse width distortion: |tp HL - tp LH| = 80 ns (max) (7) mon-mode transient immunity: ±20 k V/µs (min) (8) Operating temperature: -40 to 125  (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4). ©2015 Toshiba Corporation Start of mercial production 2013-04 2015-12-21 Rev.3.0 4. Packaging and Pin Assignment 11-4L1S 5. Internal Circuit (Note) 1: Anode/Cathode 3: Cathode/Anode 4: GND 5: VO(output) 6: VCC Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation 6.1. Truth Table Input H L LED ON OFF Output H L 6.2. Mechanical Parameters Characteristics Creepage distances Clearance Internal isolation...