Datasheet4U Logo Datasheet4U.com

TPD4206F - High Voltage 3-phase motor driver

Description

Pin No.

Unused pin, which is not connected to the chip internally.

Features

  • Weight: 1.2 g (typ. ).
  • High voltage power side and low voltage signal side terminal are separated.
  • It is the best for current sensing in three shunt resistance.
  • Bootstrap circuit gives simple high-side supply.
  • Bootstrap diodes are built in.
  • A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave drive.
  • 3-phase bridge output using MOSFETs.
  • Included over-current and under-voltage protection and shutdown.

📥 Download Datasheet

Datasheet Details

Part number TPD4206F
Manufacturer Toshiba
File Size 568.13 KB
Description High Voltage 3-phase motor driver
Datasheet download datasheet TPD4206F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPD4102K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4105AK DC Brushless Motor-Driver Toshiba Semiconductor
TPD4105K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4111K DC Brushless Motor-Driver Toshiba Semiconductor
TPD4112K DC Brushless Motor-Driver Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TPD4204F High Voltage 3-phase motor driver
TPD4207F High Voltage 3-phase motor driver IC
TPD4005K 3-Phase DC Brush Less Motor Driver
TPD4008K High Voltage Monolithic Silicon Power-IC
TPD4011K High Voltage Monolithic Silicon Power-IC

Full PDF Text Transcription

Click to expand full text
TOSHIBA Intelligent Power Device High Voltage 3-phase motor driver IC TPD4206F TPD4206F The TPD4206F is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage MOSFET (500 V). It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, MOSFET outputs, and protective functions for over-current circuit and shutdown function and under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4206F. P-SSOP30-1120-1.00-001 Features Weight: 1.2 g (typ.) • High voltage power side and low voltage signal side terminal are separated.
Published: |