Datasheet4U Logo Datasheet4U.com

TPD4207F - High Voltage 3-phase motor driver IC

Description

Pin No.

Unused pin, which is not connected to the chip internally.

Features

  • Weight: 1.2 g (typ. ).
  • High voltage power side and low voltage signal side terminal are separated.
  • It is the best for current sensing in three shunt resistance.
  • Bootstrap circuit gives simple high-side supply.
  • Bootstrap diodes are built in.
  • A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave drive.
  • 3-phase bridge output using MOSFETs.
  • Included over-current and under-voltage protection and shutdown.

📥 Download Datasheet

📁 Similar Datasheet

  • TPD4102K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4105AK - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4105K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4111K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4112K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4113AK - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4113K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4121K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4122K - DC Brushless Motor-Driver (Toshiba Semiconductor)
  • TPD4123AK - DC Brushless Motor-Driver (Toshiba Semiconductor)
Other Datasheets by Toshiba
  • TPD4204F - High Voltage 3-phase motor driver
  • TPD4206F - High Voltage 3-phase motor driver
  • TPD4005K - 3-Phase DC Brush Less Motor Driver
  • TPD4008K - High Voltage Monolithic Silicon Power-IC
  • TPD4011K - High Voltage Monolithic Silicon Power-IC
  • TPD4104AK - DC Brushless Motor-Driver
  • TPD4104K - DC Brushless Motor-Driver
  • TPD4142K - DC Brushless Motor-Driver

Full PDF Text Transcription

Click to expand full text
TOSHIBA Intelligent Power Device High Voltage 3-phase motor driver IC TPD4207F TPD4207F The TPD4207F is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage MOSFET (600 V). It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, MOSFET outputs, and protective functions for over-current circuit and shutdown function and under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4207F. P-SSOP30-1120-1.00-001 Features Weight: 1.2 g (typ.) • High voltage power side and low voltage signal side terminal are separated.
Published: |