MAAVSS0006 Datasheet | Tyco Electronics

Features - - - - - - - - Single Voltage Control: 0 to -3 Volts 25 d B Attenuation Range at 0.9 GHz Low DC Power Consumption Lead-Free SOT-25 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold pound 260°C Reflow patible Ro HS- pliant Version of AT-255 Description M/A-’s MAAVSS0006 is a Ga As MMIC voltage variable absorptive attenuator in a lead-free SOT-25 surface mount plastic package. The MAAVSS0005 is ideally suited for use where variable attenuation, fine tuning, and very low power consumption are required. Typical applications include radio, cellular, GPS equipment and automatic gain/level control circuits. The MAAVSS0006 is fabricated using a mature 1-micron Ga As MESFET process. The process features full chip passivation for increased performance and reliability. 1 RF 2 GND 3 RF 1. VC = -3 V to 0 V @ 25 µA maximum. Pin Configuration Pin No. 1 2 Function RF Port Ground RF Port Pin No. 4 5 Function Ground VC Ordering Information Part Number MAAVSS0006 MAAVSS0006TR-3000 Package Bulk Packaging 3000 piece reel Absolute Maximum Ratings 2,3 Parameter Input Power Control Voltage VC Operating Temperature Storage Temperature Absolute Maximum +21 d Bm Note: Reference Application Note M513 for reel size information. -8 V < Vc < +0.5 V -40°C to +85°C -65°C to +150°C 2. Exceeding any one or bination of these limits may cause permanent damage to this device. 3. M/A- does not remend sustained operation near these survivability limits. - Restrictions on Hazardous Substances, European Directive 2002/95/EC. 1 M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A- assume any liability whatsoever arising out of the use or application of any product(s) or information. - North America Tel: 800.366.2266 / Fax: 978.366.2266 - Europe Tel:...