MAAVSS0007 Datasheet | Tyco Electronics

Features - - - - - - - - - - Single Positive Voltage Control: 0 to +5 Volts 40 d B Attenuation Range at 900 MHz ± 2 d B Linearity from BSL Low DC Power Consumption Tape and Reel Packaging Available Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold pound 260°C Reflow patible Ro HS- pliant Version of AT-108 Description M/A-'s MAAVSS0007 is a Ga As MESFET MMIC voltage variable absorptive attenuator in a lead-free SOIC-8 surface mount plastic package. The MAAVSS0007 is ideally suited for use where linear attenuation, fine tuning and very low power consumption are required. Typical applications include radio, cellular, GPS equipment and automatic gain/level control circuits. The MAAVSS0007 is fabricated with a monolithic Ga As MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. 1 2 3 4 1. Vcc = +5 VDC @ 50 µA maximum. 2. Vc = 0 VDC to +5 VDC @ 50 µA maximum. 3. External DC blocking capacitors are requirements on all RF ports. 4. 39 p F used for data measurements. Pin Configuration Pin No. 1 2 Function Ground Ground RF Port VCC Pin No. 5 6 7 8 Function VC Ground RF Port Ground Ordering Information Part Number MAAVSS0007 MAAVSS0007TR Package Bulk Packaging 1000 piece reel 3 4 Absolute Maximum Ratings 5,6 Parameter Input Power Supply Voltage VCC Control Voltage VC Operating Temperature Storage Temperature Note: Reference Application Note M513 for reel size information. Absolute Maximum +21 d Bm -1 V < VCC < +8 V -1 V < VC < VCC +0.5 V -40°C to +85°C -65°C to +150°C 5. Exceeding any one or bination of these limits may cause permanent damage to this device. 6. M/A- does not remend sustained operation near these survivability limits. - Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no...