MASWSS0005 Datasheet | Tyco Electronics

Features - - - - Low Insertion Loss: 0.35 d B @ 2.4 GHz Moderate Isolation: 21 d B @ 2.4 GHz Low Current Consumption: 5 µA @ 2.5 V Low Cost Plastic SOT-26 Package MASWSS0005 V4 Functional Schematic C=39p F V1 V2 Description M/A-’s MASWSS0005 is a Ga As PHEMT MMIC single pole, double throw (SPDT) switch in a low cost SOT-26 surface mount plastic package. The MASWSS0005 is ideally suited for applications where small size and low cost are required. Typical applications are dual band systems which require switching between small signal ponents such as filter banks, single-band LNAs, converters, etc. This part can be used for low power, low loss requirements in all systems operating up to 3 GHz, including PCS, GSM, DCS, Satellite Radio, Blue Tooth, and other receive chain applications. The MASWSS0005 is fabricated using a 0.5 micron gate length Ga As PHEMT process. The process features full passivation for performance and reliability. PIN 1 C=39p F C=39p F RF1 RF2 Pin Configuration Pin No. 1 2 3 Function RF1 GND RF2 V2 RFC V1 Description RF Port 1 Ground RF Port 2 Control 2 RF Input Control 1 Ordering Information Part Number MASWSS0005 MASWSS0005TR-3000 MASWSS0005SMB 4 5 Package Bulk Packaging 3000 piece reel Sample Board Absolute Maximum Ratings1,2 Parameter Absolute Maximum +26 d Bm +8.5 V -40°C to +85°C -65°C to +150°C Note: Reference Application Note M513 for reel size information. Input Power @ 2.5 V Control Operating Voltage Operating Temperature Storage Temperature 1. Exceeding any one or bination of these limits may cause permanent damage to this device. 2. M/A- does not remend sustained operation near these survivability limits. M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A- assume any liability whatsoever arising out of...