MASWSS0029 Datasheet | Tyco Electronics

Features - - - - - - Low Voltage Operation: 2.8V High IP3: +60 d Bm Low Insertion Loss: 0.40 d B at 1.0 GHz High Isolation: 24.5 d B at 1.0 GHz SOT-26 Package 0.5 micron Ga As PHEMT Process MASWSS0029 V2 Functional Schematic PIN 1 PIN 6 RF1 39 p F GND RF2 39 p F V1 RFC 39 p F V2 Description M/A-’s MASWSS0029 is a Ga As PHEMT MMIC single pole double throw (SPDT) high power switch in a low cost SOT-26 package. The MASWSS0029 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are for CDMA handset systems that connect separate transceiver and/or GPS functions to a mon antenna, as well as other related handset and general purpose applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. The MASWSS0029 is fabricated using a 0.5 micron gate length Ga As PHEMT process. The process features full passivation for performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 Pin Name RF1 GND RF2 V2 RFC V1 Description RF Port 1 RF Ground RF Port 2 Control 2 RF mon Port Control 1 Ordering Information1 Part Number MASWSS0029 MASWSS0029TR MASWSS0029SMB Absolute Maximum Ratings 2,3 Package Bulk Packaging 1000 piece reel Sample Test Board Parameter Input Power (0.5 - 3 GHz, 3 V Control) Operating Voltage Operating Temperature Storage Temperature Absolute Maximum +35 d Bm +8.5 volts -40°C to +85°C -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. Exceeding any one or bination of these limits may cause permanent damage to this device. 3. M/A- does not remend sustained operation near these survivability limits. M/A- Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A- makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does...