MAAVCC0002 Datasheet | Tyco Electronics

Voltage Variable Absorptive Attenuator 1700 - 2200 MHz V 2.00 Features n n n n n n n n n n CSP-8, 28 Lead, 6mm Input IP3: +31 d Bm Min (Full Attenuation Range) Input IP3 is 15 -20 d B Better than Ga As Linear Operation: +20 d Bm Min. Plastic, 28 Lead, 6 mm CSP, SMT Package 35 d B Dynamic Range (With 30 m A Bias Current) Single Control Voltage 50 ohm Impedance Linear Driver, DR65-0002, Available Test Boards are Available Tape and Reel Packaging Available Description M/A-'s MAAVCC0002 is a PIN diode based voltage variable attenuator. This device is in a 6mm square, 28 lead, plastic CSP package, suitable for surface mounting on PCBs. These attenuators have linear operating power and input intercept point levels 15 - 20 d B better than Ga As FET MMIC voltage variable attenuators. They are ideally suited for use where low distortion, high linear operating power and high dynamic range are required. These devices are optimized for the PCS and UMTS frequency bands, but exhibit excellent performance and repeatability over the entire specified frequency band. The MAAVCC0002 is ideally suited for wireless munications systems. Package outline conforms to JEDEC standard MO-220B. Electrical Specifications: TA = 25°C Parameter Insertion Loss Attenuation (Above Loss) Frequency Flatness VSWR Switching Speed Linear Operation Input IP3 P1 d B I Control Test Conditions 0 volts 10 m A bias current 0 to 30 d B attenuation 0 to 30 d B attenuation 50% Control to 90%/10% RF - Two-tone inputs up to +10 d Bm Full Attenuation Range - Frequency 1700-2200 MHz 1700-2200 MHz 1930 - 1990 MHz 2000 - 2200 MHz 1700-2200 MHz 1700-2200 MHz 1700-2200 MHz 1700-2200 MHz 1700-2200 MHz 1700-2200 MHz Units d B d B d B d B Ratio µS d Bm d Bm d Bm m A Min. - 30 - - - - - +31 - - Typ. 2.9 33 0.5 1.0 2:1 - +20 - +23 - Max. 4.0 - 0.8 2.0 2:2 3.0 - - - 30 Voltage Variable Absorptive Attenuator 1700 - 2200 MHz Typical Performance Curves Insertion...