Datasheet4U Logo Datasheet4U.com

UT3232 - 3.0V TO 5.5V LOW POWER MULTICHANNEL RS-232 LINE TRANSCEIVERS

General Description

The UTC UT3232 has two receivers and two drivers, and a dual charge-pump circuit.

The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector.

Key Features

  • Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins.
  • Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards.
  • Operates With 3.0V to 5.5V VCC Supply.
  • Operates Up To 250kbit/s Data Rate.
  • Two Drivers and Two Receivers.
  • External Capacitors 4×0.1μF.
  • Accepts 5.0V Logic Input With 3.3V Supply.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UT3202 3.0V TO 5.5V LOW POWER MULTICHANNEL RS-232 LINE TRANSCEIVERS UTC
UT3221 MULTICHANNAEL RS-232 LINE DRIVER/RECEIVER UTC
UT3221E MULTICHANNAEL RS-232 LINE DRIVER/RECEIVER UTC
UT3227 RS-232 LINE DRIVER/RECEIVER UTC
UT3243A MULTICHANNAEL RS-232 LINE DRIVERS/RECEIVERS UTC

Other Datasheets by Unisonic Technologies

Part Number Description
UT3222 3V TO 5.5V MULTICHANNEL RS-232 LINE TRANSCEIVERS
UT3223 RS-232 LINE DRIVERS/RECEIVERS
UT3243 MULTICHANNAEL RS-232 LINE DRIVERS/RECEIVERS
UT3006 N-Channel Power MOSFET
UT3413 Power MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UT3232 3.0V TO 5.5V LOW POWER MULTICHANNEL RS-232 LINE TRANSCEIVERS USING FOR 0.1μF EXTERNAL CAPACITORS  DESCRIPTION The UTC UT3232 has two receivers and two drivers, and a dual charge-pump circuit. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3.0V to 5.5V supply. The device operates at data signaling rates up to 250kbit/s and a maximum of 35V/μs driver output slew rate.  FEATURES * Exceeds ±8KV ESD Protection(HBM) for RS-232 I/O Pins * Meets the Requirements of TIA/EIA-232-F and ITU V.28 Standards * Operates With 3.0V to 5.