Datasheet4U Logo Datasheet4U.com

U74HC373 - OCTAL D-TYPE TRANSPARENT LATCH

Datasheet Summary

Description

The U74HC373 consists of eight D-type transparent latches with 3-state outputs.

corresponding with the data present at D0 to D7.

Features

  • Operation Voltage Range: 2~6V.
  • Drive Up to 15 LSTTL Loads.
  • 3-State Outputs.
  • Output Capability Suitable for Bus Driving.

📥 Download Datasheet

Datasheet preview – U74HC373

Datasheet Details

Part number U74HC373
Manufacturer Unisonic Technologies
File Size 268.90 KB
Description OCTAL D-TYPE TRANSPARENT LATCH
Datasheet download datasheet U74HC373 Datasheet
Additional preview pages of the U74HC373 datasheet.

📁 Similar Datasheet

  • U74HC32 - QUADRUPLE 2-INPUT POSITIVE-OR GATES (UTC)
  • U74HC00 - QUADRUPLE 2-INPUT POSITIVE-NAND GATES (UTC)
  • U74HC123 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (UTC)
  • U74HC138 - 3-TO-8 LINE DECODERS / DEMULTIPLEXERS (UTC)
  • U74HC14 - HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER (UTC)
  • U74HC148 - 8-LINE TO 3-LINE PRIORITY ENCODERS (UTC)
  • U74HC164 - 8-BIT SERIAL-IN AND PARALLEL-OUT SHIFT REGISTER (UTC)
  • U74HC165 - 8-BIT PARALLEL-LOAD SHIFT REGISTER (UTC)
  • U74HC1G06 - SINGLE INVERTER (UTC)
  • U74HC1G66 - BILATERAL SWITCH (UTC)
Other Datasheets by Unisonic Technologies
  • U74HC374 - OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
  • U74HC377 - OCTAL D-TYPE FLIP-FLOPS
  • U74HC02 - HCQUADRUPLE 2-INPUT NOR GATES
  • U74HC04 - HEX INVERTERS
  • U74HC07 - HEX INVERTERS
  • U74HC08 - QUAD 2-INPUT AND GATES
  • U74HC157 - QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS / MULTIPLEXERS
  • U74HC20 - DUAL 4-INPUT NAND GATES

Full PDF Text Transcription

Click to expand full text
UNISONIC TECHNOLOGIES CO., LTD U74HC373 OCTAL D-TYPE TRANSPARENT LATCH  DESCRIPTION The U74HC373 consists of eight D-type transparent latches with 3-state outputs. When letch-enable (LE) is high, the latches operate at the transparent mode, and the latches’ output will change corresponding with the data present at D0 to D7. When output-enable (OE) is low, the contents of the latches will be present at the outputs. The outputs will be in the high impedance when OE goes high.
Published: |