Datasheet4U Logo Datasheet4U.com

US2076A - DUAL USB HIGH-SIDE POWER SWITCH

General Description

The UTC U2076A is a dual integrated high-side power switch particularly designed for self-powered and bus-powered Universal Serial Bus (USB) applications.

The UTC U2076A meets the requirements of the USB.

The low on-resistance of the switch satisfies USB voltage drop requirements.

Key Features

  • S.
  • MOSFET with Low On-Resistance: 140mΩ max. @5.0V per Channel.
  • Continuous Load Current: 500mA (MIN. ) per Channel.
  • Off-State Supply Current: 1µA (TYP. ).
  • Output can be Forced Higher than Input (Off-State).
  • Current Limit up to 1.25A (MAX. ).
  • Input Supply Voltage: 3.0V ~ 5.5V.
  • On-State Supply Current: 110µA (TYP. ).
  • Thermal Shutdown Protection Circuit.
  • UVLO (Undervoltage Lockout): 2.4V (TYP. ).
  • Open-Drain Fault Flag.
  • 1ms Turn-On (Soft-Start) and Fa.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
US2076 PWM SWITCHER CONTROLLER & 7.5A ADJUSTABLE LOW DROPOUT REGULATOR COMBO UNISEM
US2075 PWM SWITCHER CONTROLLER & 7.5A LOW DROPOUT REGULATOR COMBO UNISEM
US2075A DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH UTC
US20 RECTIFIERS ASSEMBLIES Microsemi Corporation
US200A RECTIFIERS ASSEMBLIES Microsemi Corporation

Other Datasheets by Unisonic Technologies

Part Number Description
US2076 DUAL USB HIGH-SIDE POWER SWITCH
US2076B DUAL USB HIGH-SIDE POWER SWITCH
US2075C DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH
US2005 FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH
US201 HIGH-SIDE POWER SWITCHES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD US2076A Preliminary DUAL USB HIGH-SIDE POWER SWITCH „ DESCRIPTION The UTC U2076A is a dual integrated high-side power switch particularly designed for self-powered and bus-powered Universal Serial Bus (USB) applications. The UTC U2076A meets the requirements of the USB. The low on-resistance of the switch satisfies USB voltage drop requirements. Fault current is limited to typically 750mA, well below the UL 25VA safety requirement. Flag outputs are available to indicate fault conditions to the local USB controller. In addition, soft start can eliminate the momentary voltage drop which is generated on the upstream port that may occur when the switch is enabled in bus-powered applications.