Datasheet4U Logo Datasheet4U.com

US2075C - DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH

General Description

The UTC US2075C is a dual channel power switch with independent enable and flag functions, optimized for bus-powered Universal Serial Bus (USB) and self-powered applications.

Key Features

  • S.
  • 100 μA MAX operating current.
  • 5μA MAX standby current.
  • 3.5V ~ 5.5V operating range.
  • Two P-channel power MOSFET control switch.
  • Over-current protection.
  • Under-voltage lockout circuit.
  • Thermal shutdown circuit.
  • Soft-start circuit.
  • Flag indicates fault conditions.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
US2075 PWM SWITCHER CONTROLLER & 7.5A LOW DROPOUT REGULATOR COMBO UNISEM
US2075A DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH UTC
US2076 PWM SWITCHER CONTROLLER & 7.5A ADJUSTABLE LOW DROPOUT REGULATOR COMBO UNISEM
US20 RECTIFIERS ASSEMBLIES Microsemi Corporation
US200A RECTIFIERS ASSEMBLIES Microsemi Corporation

Other Datasheets by Unisonic Technologies

Part Number Description
US2076 DUAL USB HIGH-SIDE POWER SWITCH
US2076A DUAL USB HIGH-SIDE POWER SWITCH
US2076B DUAL USB HIGH-SIDE POWER SWITCH
US2005 FIXED CURRENT LIMIT POWER DISTRIBUTION SWITCH
US201 HIGH-SIDE POWER SWITCHES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD US2075C DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH FOR USB CMOS IC  DESCRIPTION The UTC US2075C is a dual channel power switch with independent enable and flag functions, optimized for bus-powered Universal Serial Bus (USB) and self-powered applications. This product satisfies USB voltage drop requirement with soft start, which eliminates the momentary voltage drop on the upstream port that may occur. In addition, the UTC US2075C is equipped with over-temperature and over-current detectors, each flag output is available to indicate fault conditions independently to the USB controller. The UTC US2075C is available in active-high versions.  FEATURES * 100 μA MAX operating current * 5μA MAX standby current * 3.5V ~ 5.