MIM-0KM2AKF Datasheet | Unity Opto Technology

Description The MIM-03M2AKF is 37.9 KHZ miniaturized infrared receivers for remote control and other appplications requiring improved ambient light rejection. The separate PIN diode and preamplifier IC are assembled on a single leadframe. The epoxy package contains a special IR filter. This module has excellent performance even in disturbed ambient light applications and provides protection against uncontrolled output pulses. Features Photo detector and preamplifier in one package Internal filter for PCM frequency High immunity against ambient light Improved shielding against electric field disturbance 2.4-Volt supply voltage; low power consumption TTL and CMOS patibility BLOCK DIAGRAM TRAP TRIMMING Output ABLC fo GND PRELIMINARY A1 Unity Opto Technology Co., Ltd. 3/2/00 Absolute Maximum Ratings Item Supply voltage Operating temperature Storage temperature Soldering temperature Symbol VCC Topr Tstg Tsd Ratings 5.8 -10 ~ + 60 -20 ~ + 75 260 Unit V ℃ ℃ ℃ Maximum 5 seconds @ Ta=25℃ Remark Electro-optical characteristics (Vcc=3V) Parameter Current consumption Response wavelength Tuning frequency Output form H level output voltage L level output voltage H level output pulse width L level output pulse width Distance between emitter & detector Half angle V0h V0l Twh Twl L △Θ 400 400 10.0 ±45 Symbol Icc λp f0 940 37.9 Min. Typ. Max. 5.0 Unit m A nm KHZ (Ta=25°C , Vcc=3V) Remarks Under no signal - - - - - active low output - - - - 2.2 0.5 800 800 V V μs μs m deg Note 1 Horizonal direction Test Method A. Standard Transmitter ON/OFF pulse width satisfied from 25 cm to detection limit carrier frequency f0 duty 50% 600µs 600µs 600µs Fig 1. Burst Wave 25cm +3V PD3516 10kΩ 10µF 10kΩ Transmitter Duty 50% Vout GND Oscilloscope Fig 2. Standard Transmitter Measurement circuit PRELIMINARY A1 Unity Opto Technology Co., Ltd. 3/2/00 B. Detection Length Test Transmitter...