MIM-0KM2AKL Datasheet | Unity Opto Technology

Description The MIM-0KM2AKL SERIES is miniaturized infrared receivers for remote control and other appplications requiring improved ambient light rejection. The separate PIN diode and preamplifier IC are assembled on a single leadframe. The epoxy package contains a special IR filter. This module has excellent performance even in disturbed ambient light applications and provides protection against uncontrolled output pulses. Features Photo detector and preamplifier in one package Internal filter for PCM frequency High immunity against ambient light Improved shielding against electric field disturbance 2.4-Volt supply voltage; low power consumption TTL and CMOS patibility BLOCK DIAGRAM TRAP TRIMMING Output ABLC fo GND PRELIMINARY Unity Opto Technology Co., Ltd. 01/12/01 Absolute Maximum Ratings Item Supply voltage Operating temperature Storage temperature Soldering temperature Symbol VCC Topr Tstg Tsd Ratings 5.8 -10 ~ + 60 -20 ~ + 75 260 Unit V ℃ ℃ ℃ Maximum 5 seconds @ Ta=25℃ Remark Electro-optical characteristics (Vcc=2.4V) Parameter Current consumption Response wavelength Tuning frequency Output form H level output voltage L level output voltage H level output pulse width L level output pulse width Distance between emitter & detector Half angle V0h V0l Twh Twl L △Θ 400 400 10.0 ±45 Symbol Icc λp f0 940 37.9 , 32.7 , 40.0 , 36.7 , 56.7 Min. Typ. Max. 5.0 Unit m A nm KHZ (Ta=25°C , Vcc=2.4V) Remarks Under no signal - - - - - active low output - - - - 2.2 0.5 800 800 V V μs μs m deg Note 1 Horizonal direction Test Method A. Standard Transmitter ON/OFF pulse width satisfied from 25 cm to detection limit 25cm PD3516 carrier frequency f0 duty 50% 600µs 600µs Transmitter Duty 50% +2.4V 10kΩ 10µF Vout GND Oscilloscope 600µs Fig 1. Burst Wave Fig 2. Standard Transmitter Measurement circuit B. Detection Length Test Transmitter output θ θ D.U.T...