CO600 Datasheet | Vanlong Technology

Clipped-Sine & HCMOS OCXO .. Oven Controlled Crystal Oscillator - - - - Low power consumption Excellent temperature stabilities High stability AT-cut crystal Fast warm-up Specifications: Frequency Range: Operating Temperature: 2.0 MHz or 150.0 MHz 0°C ~ +50°C -10°C ~ +45°C -10°C ~ +55°C -20°C ~ +60°C -30°C ~ +70°C Storage Temperature: Frequency Stability: Accuracy: Vs. Temperature: ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 2 x 10-10 ± 1 x 10-9 ± 5 x 10-7 - 57 - 17 - 58 - 18 - 59 per second per day per year max -40°C ~ +85°C -A -B -C -D -E CO-A Short-Term Stability: Aging Rate: Output Waveform: Output Level: Phase Noise: Clipped-Sine Wave, HCMOS 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS patible -100d Bc/Hz -130s Bc/Hz -140d Bc/Hz -145d Bc/Hz -30 d B +5.0 VDC (± 5%) +12.0 VDC (± 5%) -P All dimensions are in mm @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin 1 2 3 4 5 6 Configurations Vcc Vref Vc/Nc Ground Output Vcc Ground Harmonics Distortion: Supply Voltage: Supply Current: 400m A max at warm-up 100m A max after warm-up at 25°C 4.0 Watts max ±3.0 ppm tuning via ext potentiometer Warm-up: Frequency Adjust: Note: 1. 2. Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO600C18-10.0MHz or CO600D58P-10.0MHz Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. Not all binations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. All specifications subject to change without notice. 3. Phone: +86 10 6301 4184 June 2001 Fax: +86 10 6301...