CO604 Datasheet | Vanlong Technology

Clipped-Sine & HCMOS OCXO .. Oven Controlled Crystal Oscillator - - - - Frequency range 2.0MHz ~ 80.0MHz Excellent temperature stabilities Fast warm-up, small size SC-cut high precision overtone crystal Specifications: Frequency Range: Operating Temperature: 2.0 MHz or 80.0 MHz 0°C ~ +50°C -10°C ~ +45°C -10°C ~ +55°C -20°C ~ +60°C -30°C ~ +70°C Storage Temperature: Frequency Stability: Accuracy: Vs. Temperature: -40°C ~ +85°C ± 5 x 10-9 ± 5 x 10-7 ± 1 x 10-7 ± 5 x 10-8 ± 1 x 10-8 ± 5 x 10-9 ± 5 x 10-12 ± 1 x 10-10 ± 5 x 10-9 -A -B -C -D -E CO-E Short-Term Stability: Aging Rate: Output Waveform: Output Level: Phase Noise: - 57 - 17 - 58 - 18 - 59 per second per day per year max Clipped-Sine Wave, HCMOS 1.0 Vp-p min clipped-sine @ 1KΩ TTL, HCMOS patible -100d Bc/Hz -130s Bc/Hz -140d Bc/Hz -145d Bc/Hz -25 d B +5.0 VDC (± 5%) +12.0 VDC (± 5%) -P All dimensions are in mm @ 10 Hz @ 100 Hz @ 1 KHz @ 10 KHz Pin 1 2 3 4 5 Configurations Vcc Vref Vc/Nc Ground Output Harmonics Distortion: Supply Voltage: Supply Current: 500m A max at warm-up 250m A max after warm-up at 25°C ±3.0 ppm tuning via ext potentiometer Frequency Adjust: Note: 1. 2. Ordering Information Product name + Temperature + Stability + Frequency + Other Specification Code. i.e. CO604C18-10.0MHz or CO604D58P-10.0MHz Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. Not all binations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. All specifications subject to change without notice. 3. Phone: +86 10 6301 4184 June 2001 Fax: +86 10 6301...