TFS120 Datasheet | Vectron International

Tfs120.doc Version 1.2 VI TELEFILTER Measurement condition Ambient temperature TA: Input power level: Terminating impedances at f N: Q-value of matching elements: 23 °C 0 d Bm. for input: for output: 30 Filter Specification TFS 120 - 1/4 460 Ω  - 11,2 p F. 440 Ω  - 13,0 p F. ( typical value.) Characteristics Remark: Reference level for the relative attenuation arel of the TFS 120 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae . The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 25 d B filter attenuation level relative to the insertion loss ae. The nominal frequency f N is fixed on 120 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency Tcf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data Insertion loss (Reference level) : ae Nominal frequency : Centre frequency Pass band : Bandwidth : 1 d B - band width 25 d B - band width Amplitude ripple in pass band (p-p): Relative attenuation arel : f N fc at ambient temperature ( f CAT ) typ. value 12,50 d B tolerance / limit max 15 120 d B MHz 120,01 MHz f N - 100 k Hz ..... f N + 100 k Hz 260 764 0,7 k Hz MHz d B min. 200 max. 800 max. 1,0 k Hz k Hz d B f N ..... f N ± 100 k Hz f N ± 400 k Hz ... f N ± 600 k Hz f N ± 600 k Hz ... f N ± 1000 k Hz f N ± 1,0 MHz ... f N ± 35 MHz Group delay (mean value in pass band) : Group delay ripple in pass band (p-p) : Deviation from linear phase in pass band : Triple transit attenuation pared to main signal Crosstalk attenuation pared to main signal Frequency inversion temperature ( To ) Temperature coefficient of frequency ( Tcf ) Frequency deviation of fc over temperature T : - ): Operating temperature range...