Datasheet4U Logo Datasheet4U.com

DG2729 - (DG2727 - DG2729) Dual SPST Analog Switch

This page provides the datasheet information for the DG2729, a member of the DG2727 (DG2727 - DG2729) Dual SPST Analog Switch family.

Datasheet Summary

Description

The DG2727, DG2728, and DG2729 are 0.6 Ω dual SPST analog switches.

When Sx are used as signal input, these devices support AC-coupled audio signals with single rail power supply.

Audio signals can swing below ground down to V+ - 4.3 V.

Features

  • Halogen-free according to IEC 61249-2-21 definition.
  • Wide operation voltage range: 1.6 V to 4.3 V.
  • Low 0.6 Ω (typical at 2.7 V) on-resistance.
  • Guaranteed logic high threshold: Vth(high) = 1.2 V at V+ = 4.3 V.
  • - 82 dB crosstalk and - 76 dB off-isolation at 100 kHz.
  • 250 MHz, - 3 dB bandwidth.
  • 0.006 % total harmonic distortion.
  • > 250 mA latch up current per JESD78.
  • > 8 kV ESD/HBM per MIL-STD 883 (method 3015).

📥 Download Datasheet

Datasheet preview – DG2729

Datasheet Details

Part number DG2729
Manufacturer Vishay Siliconix
File Size 212.58 KB
Description (DG2727 - DG2729) Dual SPST Analog Switch
Datasheet download datasheet DG2729 Datasheet
Additional preview pages of the DG2729 datasheet.
Other Datasheets by Vishay Siliconix

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr DG2727, DG2728, DG2729 Vishay Siliconix 0.65-Ω, Low Voltage, Negative Swing Capable, Dual SPST Analog Switch DESCRIPTION The DG2727, DG2728, and DG2729 are 0.6 Ω dual SPST analog switches. When Sx are used as signal input, these devices support AC-coupled audio signals with single rail power supply. Audio signals can swing below ground down to V+ - 4.3 V. Built on Vishay Siliconix’s sub-micro CMOS technology, the DG2747/2748/2749 achieve 0.6 Ω on-resistance and 0.2 Ω flatness at 2.7 V power supply. Its total harmonic distortion is 0.006 % (frequency ranges 20 Hz to 20 kHz). It achieves - 72 dB off-isolation and - 100 dB crosstalk at 100 kHz. Its - 3 dB bandwidth is up to 78 MHz. Select pin of control logic can tolerate voltage above power supply up to 4.3 V.
Published: |