1N6376 Datasheet | Vishay

FEATURES - Glass passivated chip junction - Available in uni-directional and bi-directional - 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Solder dip 275 °C max. 10 s, per JESD 22-B106 - AEC-Q101 qualified - Material categorization: For definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, and telemunication. MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS pliant and mercial grade Base P/NHE3 - Ro HS pliant and AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) Power dissipation on infinite heatsink at TL = 75 °C (fig. 8) Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 100 A for uni-directional only Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum SYMBOL PPPM IPPM PD IFSM VF TJ, TSTG LIMIT 1500 See next table 6.5 200 3.5 - 55 to + 175 UNIT W A W A V °C Revision: 18-Sep-12 1 Document Number: 88356 For technical questions within your region: Diodes...