WCS7700 Datasheet PDF - Winson Hall Effect Base Linear Current Sensor Specs

WCS7700 - Hall Effect Base Linear Current Sensor

Datasheet Summary

Description

The WCS7700 consists of a precise, low-temperature drift linear hall sensor IC and 10.4x8 mm2 split through hole.

Users can use system’s own electric wire by pass it through this hole to measure passing current.

Features

New spring structure with high measurement stability (increased by more than 2 times).
10.4 x 8 mm2 split through hole design.
Output voltage proportional to AC and DC current.
Wide sensing current range 0~70 A at 5V volt.
High sensitivity 36 mV/A.
Wide operating voltage range 3.0~12V.
Low operating current 3 mA.
Isolation voltage 4000 V.
Ratiometric output from supply voltage.
23 KHz Bandwidth.
Two bronze sticks for easy soldering on PCB.

Datasheet Details

Part number	WCS7700
Manufacturer	Winson
File Size	1.09 MB
Description	Hall Effect Base Linear Current Sensor
Datasheet	WCS7700 Datasheet
Additional preview pages of the WCS7700 datasheet.

📁 Similar Datasheet

WCSN0436V1P - 128Kx36 Pipelined SRAM (Weida Semiconductor)

WCSS0232V1P - 64K x 32 Synchronous-Pipelined Cache RAM (Weida Semiconductor)

WCSS0418V1F - 256K x 18 Synchronous 3.3V Cache RAM (Weida Semiconductor)

WCSS0418V1P - 256K x 18 Synchronous-Pipelined Cache RAM (Weida Semiconductor)

WCSS0436V1P - 256K x 18 Synchronous 3.3V Cache RAM (Weida Semiconductor)

Full PDF Text Transcription

Click to expand full text

WCS7700 Hall Effect Base Linear Current Sensor Features:  New spring structure with high measurement stability (increased by more than 2 times)  10.4 x 8 mm2 split through hole design  Output voltage proportional to AC and DC current  Wide sensing current range 0~70 A at 5V volt  High sensitivity 36 mV/A  Wide operating voltage range 3.0~12V  Low operating current 3 mA  Isolation voltage 4000 V  Ratiometric output from supply voltage  23 KHz Bandwidth  Two bronze sticks for easy soldering on PCB Functional Description: The WCS7700 consists of a precise, low-temperature drift linear hall sensor IC and 10.4x8 mm2 split through hole. Users can use system’s own electric wire by pass it through this hole to measure passing current.

Published: Nov 17, 2024 |