AS7262 Datasheet | ams

Description The AS7262 is a cost-effective multi-spectral sensor-on-chip solution designed to address spectral ID applications. This highly integrated device delivers 6-channel multi-spectral sensing in the visible wavelengths from approximately 430nm to 670nm with full-width half-max (FWHM) of 40nm. An integrated LED driver with programmable current is provided for electronic shutter applications. The AS7262 integrates Gaussian filters into standard CMOS silicon via nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the I²C register set, or with a high level AT Spectral mand set via a serial UART. Ordering Information and Content Guide appear at end of datasheet. Figure 1: Added Value of Using AS7262 Key Benefits & Features The benefits and features of AS7262, 6-Channel Visible Spectral_ID Device with Electronic Shutter and Smart Interface are listed below: Benefits - pact 6-channel spectrometry solution - Simple text-based mand interface via UART, or direct register read and write with interrupt on sensor ready option on I²C - Lifetime-calibrated sensing with minimal drift over time or temperature - No additional signal conditioning required - Electronic shutter control/synchronization - Low voltage operation - Small, robust package, with built-in aperture Features - 6 visible channels: 450nm, 500nm, 550nm, 570nm, 600nm and 650nm, each with 40nm FWHM - UART or I²C slave digital Interface - Visible filter set realized by silicon interference filters - 16-bit ADC with digital access - Programmable LED drivers - 2.7V to 3.6V with I²C interface - 20-pin LGA package 4.5mm x 4.7mm x 2.5mm -40°C to 85°C temperature range Datasheet, Public [v4-00] 2022-Nov-30 Page 1 Document Feedback Figure 2: AS7262 Visible Spectral_ID System - General Description Applications The AS7262...