Datasheet4U Logo Datasheet4U.com

74HC374 - Octal Edge-Triggered D-Type Flip-Flops

General Description

These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.

They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

Key Features

  • Wide Operating Voltage Range of 2 V to 6 V.
  • High-Current 3-State True Outputs Can Drive Up to 15 LSTTL Loads.
  • Eight D-Type Flip-Flops in a Single Package.
  • Full Parallel Access for Loading.
  • Low Power Consumption, 80-µA Max ICC.
  • Typical tpd = 14 ns.
  • ±6-mA Output Drive at 5 V.
  • Low Input Current of 1 µA Max 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC374 Octal D-type flip-flop nexperia
74HC374 Octal 3-State Non-Inverting D Flip-Flop ON Semiconductor
74HC374A Octal 3-State Non-Inverting D Flip-Flop Motorola
74HC374D Octal D-Type Flip-Flop Toshiba
74HC374D Octal D-type flip-flop nexperia

Other Datasheets by Texas Instruments

Part Number Description
74HC373 Octal Transparent D-Type Latches
74HC377 Octal D-Type Flip-Flop
74HC30 8-Input NAND Gate
74HC32 Quad 2-Input OR Gate
74HC354 8-Line to 1-Line Data Selector/Multiplexer/Register

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC374, SN74HC374 SCLS141G – DECEMBER 1982 – REVISED APRIL 2022 SNx4HC374 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 1 Features • Wide Operating Voltage Range of 2 V to 6 V • High-Current 3-State True Outputs Can Drive Up to 15 LSTTL Loads • Eight D-Type Flip-Flops in a Single Package • Full Parallel Access for Loading • Low Power Consumption, 80-µA Max ICC • Typical tpd = 14 ns • ±6-mA Output Drive at 5 V • Low Input Current of 1 µA Max 2 Description These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.