Datasheet4U Logo Datasheet4U.com

74HC595 - 8-Bit Shift Registers

General Description

The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.

The storage register has parallel 3state outputs.

Separate clocks are provided for both the shift and storage register.

Key Features

  • 8-bit serial-in, parallel-out shift.
  • Wide operating voltage range of 2 V to 6 V.
  • High-current 3-state outputs can drive up to 15 LSTTL loads.
  • Low power consumption: 80-μA (maximum) ICC.
  • tpd = 13 ns (typical).
  • ±6-mA output drive at 5 V.
  • Low input current: 1 μA (maximum).
  • Shift register has direct clear.
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC595 8-Bit Serial-In/Serial-Out or Parallel-Out Shift Register SG Micro
74HC595 8-Bit Serial-Input/Serial or Parallel-Output Shift Register ON Semiconductor
74HC595 8-bit Shift Register/Latch Hitachi
74HC595 8-bit shift register ST Microelectronics
74HC595 8-bit serial-in serial or parallel-out shift register NXP

Other Datasheets by Texas Instruments

Part Number Description
74HC540 Octal Buffers and Line Drivers
74HC574 Octal Edge-Triggered D-Type Flip-Flops
74HC02 Quadruple 2-Input Positive-NOR Gates
74HC03 Quadruple 2-Input NAND Gates
74HC04 Hex Inverters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HC595, SN74HC595 SCLS041J – DECEMBER 1982 – REVISED OCTOBER 2021 SNx4HC595 8-Bit Shift Registers With 3-State Output Registers 1 Features • 8-bit serial-in, parallel-out shift • Wide operating voltage range of 2 V to 6 V • High-current 3-state outputs can drive up to 15 LSTTL loads • Low power consumption: 80-μA (maximum) ICC • tpd = 13 ns (typical) • ±6-mA output drive at 5 V • Low input current: 1 μA (maximum) • Shift register has direct clear • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.